Pack of 80No. 18mm x 2400mm x 600mm P5 Mr T & G Chipboard Sheet

SKU: S000156
Pack of 80No. 18mm x 2400mm x 600mm P5 Mr T & G Chipboard Sheet
Move your mouse over image or click to enlarge

Availability: 3-7 working days delivery

Inc VAT: £774.06

Availability: 3-7 working days delivery

Delivery : Free delivery

Online Order Enquires:

020 8362 8145

You May Also Like

Product Description

Fork lift required to unload. If onsite mechanical offload is required, please contact us on 0208 362 8100 and we can quote you for this additional service. you must advise of any width / height restrictions / time restrictions.

T & G Flooring Grade Chipboard or P5 is a moisture resistant structural grade flooring grade board. It is used generally in flooring applications as the construction of the board adds strength when boards are slotted together and screwed or nailed down to floor joists. It can be used in all general flooring applications, kitchens and bathrooms included. It is suitable for domestic applications and has a sanded smooth surface and will accept all types of floor covering. Also because of the density of the product it helps with insulation when used with a suitable acoustic or thermal slab type insulation. The narrow sheet size enables the product to be handled easily particularly in tight spaces such as lofts.

Key features
  • T&G profile edges
  • Smooth surface
  • Easily cut
  • Moisture resistant
  • Structural application
  • Accepts most coverings
  • Easily veneered or decorated

Application
A generous amount of Adhesive should be applied directly into the groove of the board. Position board and close joints tightly. Ensure a small bead of Adhesive is forced out of the joint on both the top and bottom of the board along the entire length of the joint. Any excess adhesive can be wiped away using a damp cloth. You are now left with a sealed joint. Panels are glued to the joists and noggins using the adhesive and fixed using 10 gauge annular ring-shank nails of length 2.5 times the thickness of the panel, nails should be positioned 25 mm from each corner and edge of the board and then at equidistant points in between at a rate of four nails per joist. Nails should be hammered flush with the surface of the panel. All nail runs and exposed edges around the perimeter should be immediately painted with adhesive, this operation must be carried out in dry conditions.

Technical data
P5 Moisture resistant manufactured to EN312-5

Additional Information

timber_length No
metre_priced No
Thickness No
Effect No
Dimensions No
Pack Size No
Boards Per Pack No
flooring_finish1 No
Edges No
Installation Method(s) No
Underfloor Heating No
Suitable For No
Domestic Warranty No
Commercial Warranty No
Durability Rating No
Construction No
Finish No
Wear Layer No
Width No
Installation Method No
Lengths No
Length Type No
M2 Per Pack No
Average Length No
Pack Weight No
Top Edge Detail No
Surface Texture No
Colouring Process No
Suitable for Underfloor Heating No
Hardness No
Timber Source No
Environmental No
Manufacturer No
Brand No
Range No
Suitable for No
Backing No
Colour No
Finish No
Secondry Finish No
Range No
Thickness No
Material No
coshh information No
Size 18mm X 2400mm X 600mm
length No
Unit Of Sale N/A
kerridge_weight No
brand Pacific Star
Barcode N/A
edpcode 14401
Pack No
cores No
Screwed / Screwless No
Insert Colour No
Gangs No
Ways No
Pole Type No
IP Rating No
Amps No
Lamp / Bulb Type No
Fitting Type No
Dimmable No
Lumens No
Colour Temp No
Lamp Render No
Lamp / Bulb Shape No
Cut Out Size No
Wattage No
Voltage No
handle_type No
fixings_style No
construction_style No
cylinder_style No
rose_style No
lock_style No
Grade No
Re-Coat Time No
Drying Time No
cabinet size No
glazing No
style No
manufacturer_extra No
durability No
comp_strength No
brick_guarantee No
active_salts No
water_absorption No
wirecut_stock No